(주)동방하이테크상사

LCD 디스플레이와 멤브레인 키패드, IP65
회전속도 : 10~600 rpm (1 rpm), 역회전, 높은 회전력
유량범위 : 100~11000 mL/min
펌프헤드 : YZ35, KZ35 (최대 2 헤드 장착)

개요 특징 규격 주문정보 관련제품

WT600-4F 공업용 튜브연동식 정량펌프는 강력한 회전력(토크)을 가진 BLDC모터를 장착하고 있으며, YZ35-13 또는 KZ35 펌프헤드를 2 개까지 장착할 수 있다.

채널당 100 mL/min ~ 11 Liter/min 범위에서 유량조절이 가능하며, 100 mL ~ 999 Liter 의 분주량을 설정할 수 있다.

멤브레인 키패드를 통해 작동메뉴를 설정하고, 대형 128x32 LCD 디스플레이를 통해 작동메뉴와 펌프의 작동상채를 간편하게 확인할 수 있으며, 검량기능에 의해 더욱 정밀한 유량제어가 가능하다.

높은 외함보호등급(International Protection)이 IP65로 전원 및 움직이는 부위에 대해 완전하게 보호되며, 노즐로부터 품어져 나오는 물이 어느 방향으로 품어져 나와도 해로운 영향을 주지 않는다.

개요 특징 규격 주문정보 관련제품

Industrial peristaltic pump WT600-4F is a kind of dispensing pump with high IP rating, which is especially suitable for severe environment. With DC brushless motor, the pump could drive YZ35-13 and KZ35 pump head to provide a high flow rate from 100mL/min to 11000mL/min. The LCD could display the parameters and running state. The pump could run continuously at desired flow rate and speed, and also could complete the dispensing function at desired dispensing volume, dispensing time and batch cycles. The flow rate calibration and dispensing calibration ensure the high accuracy and precision. And the dispensing volume is 100mL-999L. The pump could be controlled through control panel, external control interface and RS485 communication interface.

Back suction: Prevent dripping of liquid when dispensing a certain liquid volume

Control mode: Pump can be controlled internally through membrane keypand or externally through external control modules.

Calibration: The flow rates and dispensing volume can be calibrated to improve the accuracy.

Dispensing function: dispense the fluid at desired volume, dispensing time and batch cycles.

개요 특징 규격 주문정보 관련제품

Speed	10~600 rpm, CW/CCW
Speed resolution	1 rpm
Control mode	Control panel, external signal control and cmmunication control available
Display	LCD for running status
Working mode	Flowrate mode and Dispensing mode
Flowrate calibration	Improve accuracy
Dispensing volume	100 mL ~ 999 Liter
Dispensing calibration	Improve accuracy
Copy number	0~9999 times, ‘0’ means unlimited cycles
Pause time	0.1 sec ~ 99.9 min, resolution; 0.1 sec
Back suction time	0~9.9 circle, resolution; 0.1 circle
External control	Start/stop, cw/ccw control
Direction, speed control	0-5V, 0-10V, 4-20 mA, 0-10kHz, external control module optional
Speed output	125 Hz ~ 7.5 kHz corresponding to 10~600 rpm
Start/Stop output	OC gate signal
Direction output	OC gate signal
Communacation interface	RS485
Power-off memory	Return to previous state when power on
Prime	For fast filling and emptying at full speed
Power supply	AC220V±20%/50-60Hz
Power consumption	≤300W
Operating condition	Temperature; 0~40℃, Relative humidity; <80%
Dimensions	360 L x 215 W x 243 mmH
Weight	12 kg
IP rating	IP65