Speed |
0~300 rpm, CW/CCW |
---|---|
Speed resolution |
0.1 rpm resolution within the speed of 0-100 rpm, 1 rpm resolution within the speed of 100-300 rpm |
Display |
LCD |
Control mode |
Keypad control, external signal control and communication control |
Work mode |
Flow rate mode or dispensing mode |
Flow rate mode |
Flow rate is displayed and the pump runs continuously at the set flow rate |
Flow rate calibration |
Improve the flow rate accuracy |
Flow rate setting range |
1.000~9999mL/min |
Dispensing mode |
The pump dispenses continuously according to the parameters: dispensing volume, cycles, interval, back suction. |
Dispensing calibration |
Improve the dispensing volume accuracy. |
Dispensing Volume |
0.1 mL~9999 Liter |
Dispensing cycle |
0~9999 |
Interval time |
1 sec~99.9 min |
Back Suction |
0-9.9 revolution,resolution is 0.1 revolution |
External control |
Start/stop control, direction control:voltage level signal, 5V or 12v |
Direction control |
Voltage level signal, 5V or 12v |
Speed control |
0-5V、0-10V、0-10kHz are optional with uniform interface |
Pump status output |
1 OC gate signal for start/stop, 1 OC gate signal for direction. 125Hz-7500Hz pulse signal for pump speed 0.1rpm-300rpm (linear function) |
Communication interface |
RS485 |
Power-off memory |
Return to previous status when power on |
Footswitch control |
The pump could be start/stop controlled by footswitch accessory. |
Power supply |
AC220V±10%/120W,50~60Hz |
Operating condition |
Temperature; 0~40℃, Relative humidity;<80% |
Dimensions |
360 L ×215 W×243mm H |
Weight |
12 kg |
IP rating |
IP65 |
Drive |
Pump head |
Tubing |
Flowrates (mL/min) |
Weight (kg) |
---|---|---|---|---|
G300-3F (05.02.2CL) |
KZ35-13 |
73# 82# |
≤5500 |
17.7 |
YZ35-13 |
15.7 |
KZ35 |
|