노동 및 산업 응용 프로그램에 적합

부식 방지 페인트 처리와 알루미늄 합금 하우징을 사용하여, 펌프는 좋은 내식성 및 부식성 환경에서 긴 수명을 갖는다.

전자기 호환성이 양호한 펌프는 EMI 환경에서 도저히 간섭하지 않으며 다른 전자 장비를 방해하지 않습니다.

IP 등급이 높기 때문에 습식 및 먼지가 많은 환경에서 펌프를 사용할 수 있습니다.

고품질 의 전자 부품을 사용하여 소프트웨어 설계 및 회로 설계를 최적화한 이 펌프는 장기적으로 안정적이고 안정적인 작동을 제공합니다.

0.1 rpm 해상도(3000:1 속도 제어 범위)의 정밀한 속도 제어 및 유량 교정 기능을 통해 펌프는 보다 정확한 유량을 제공합니다.

Suitable for laboratorial and industrial application

Using aluminium alloy housing with anti-corrosion paint treatment, the pump has good corrosive resistance and longer life time in corrosive environment.

With good electromagnetic compatibility, the pump will not behave unacceptably in the EMI environment and will not interfere with other electronic equipment.

With high IP rating, the pump could be used in wet and dusty environment.

Using high quality electronic components, optimizing software design and circuit design, the pump provides long-term reliable and stable operation.

With precise speed control in 0.1rpm resolution (3000:1 speed control range), and flow rate calibration function, the pump has more accurate flow rate.

:

0~300rpm, CW/CCW

:

0.1rpm resolution within the speed of 0-100rpm

1rpm resolution within the speed of 100rpm-300rpm

:

LCD

:

Keypad control, external signal control and communication control

Work mode

:

Flow rate mode or dispensing mode

Flow rate mode

:

Flow rate is displayed and the pump runs continuously at the set flow rate

Flow rate calibration

:

Improve the flow rate accuracy

Flow rate setting range

1.000~9999mL/min

Dispensing mode

The pump dispenses continuously according to the parameters: dispensing volume, cycles, interval, back suction.

Dispensing calibration

Improve the dispensing volume accuracy.

Dispensing Volume

0.1 mL~9999 Liter

Dispensing cycle

0~9999

Interval time

1 sec~99.9 min

Back Suction

0-9.9 revolution，resolution is 0.1 revolution

:

Start/stop control, direction control：voltage level signal, 5V or 12v

Direction control

Voltage level signal, 5V or 12v

Speed control

:

0-5V、0-10V、0-10kHz are optional with uniform interface

Pump status output

:

1 OC gate signal for start/stop, 1 OC gate signal for direction.
125Hz-7500Hz pulse signal for pump speed 0.1rpm-300rpm (linear function)

Communication interface

:

RS485

Power-off memory

Return to previous status when power on

Footswitch control

:

The pump could be start/stop controlled by footswitch accessory.

:

AC220V±10%/120W，50～60Hz

:

:

360 L ×215 W×243mm H

:

:

KZ35

YZ35-13