정밀정량펌프
유체취급제품
크로마토그래피
연구실험기자재

 

 

 

WT600-2J 속도조절형 튜브연동식 정량펌프

[WT600-2J Basic Peristaltic Tubing Pump]

3-digit LED 디스플레이와 회전식 엔코더 스위치, IP31
회전속도 : 60~600 rpm (1 rpm), 역회전, 높은 회전력,
유량범위 : 4.2~6000 mL/min
펌프헤드 : YZ15, YZ25, DG15-24, KZ25  (최대 4 헤드 장착)

 

  개 요

 WT600-2J 기본형 튜브연동식 액체 정량펌프는 브러쉬리스(BLDC) 모터를 장착하여 강력한 회전력(토크)와 낮은 진동, 높은 효율성과 우수한 수명을 제공한다.

YJ15, YJ25, YZII15, YZII25, BZ25, KZ25, DMD25, DG15-24  펌프헤드 2 개를 동시에 장착할 수 있으며, 채널당 4.2~6000 mL/min 유량범위에서 이송할 수 있다.

펌프의 회전속도를 조정하고 회전방향을 바꿀 수 있으며, 유체를 교환하거나 세척하기 위해 프라임 버튼을 이용하여 펌프의 최대회전속도로 가동시킬 수 있다.

외부제어에 의해 펌프의 회전수(rpm)를 조정할 수 있으며, 작동 파라메터는 자동으로 저장된다.  

조작이 간편하다.

 

  특 징 

Big torque output that can drive double channel pump head
Drived by DC brushless motor, big torque output, high efficiency and non maintenance
Three digital LED display running information
Using ON/OFF switch, button, rotated code switch to operate pump. It is simple and pratical
Prime key for fast filling and emptying
Equipped with RS485 interface to make the pump can be controlled by PC
Reserve output interface for monitoring working status by customers (Optional)
Suitable for more pump head and tubing to make the pump to match more application of customers
Power failure memory function to store working status and machine ID.

 

  규 격

Speed

:

60~600 rpm, CW/CCW
Speed resolution

:

1 rpm
Speed accuracy

:

<±1
Control mode

:

Control panel, external signal control and communication control available
Display

:

3-digit LED displays current speed
External control

:

Start/stop, cw/ccw control 

 

 

Speed control; 4~20 mA, 0.5~5 V, 1~10 V, 1~10KHz
Communacation inbterface

:

RS485

Power-off memory

:

Return to previous state when power on

Prime

:

For fast filling and emptying at full speed

Power supply

:

AC220V±20%/50-60 Hz
Power consumption

:

200W
Operating condition

:

Temperature; 0~40℃

 

 

Relative humidity; <80%
Dimensions

:

285 L x 207 W x 180 mmH
Weight

:

5.2 kg
IP rating

:

IP31

 

  주문정보

Drive

Pump head

Tubing

Flowrates(mL/min)

Weight(kg)

WT600-2J
(05.02.63A)

(1,2,3,4) x YZ-1515

13#  14# 19# 16# 25# 17# 18#

4.2~2200/channel

5.6~6.8

(1,2,3,4) x YZ-II15

(1,2,3,4) x YZ-2515

15# 24#

 100~1600/channel

(1,2,) x YZ-II25

15# 24# 35# 36#

100~3000/channel

5.6~6.0

(1,2) x KZ25

200~6000/channel

6.0~6.8


YZ1515x, YZ2515x


YZII15, YZII25


DG15-24


KZ25

 

  기술자료

How to use Footswitch Function for WT600-2J
(Release Time:2016-12-30)

Connect Footswitch to External Control Port to control Start/Stop of pump. 

Note: 
Footswitch is optional accessories. It can only control the start and stop of the pump. The speed and direction of the pump are controlled by the knob and switch on the operation penal.

 

How to use External Control Function for WT600-2J
(Release Time:2016-12-30)


Communication Control
The pump can connect to control computer (computer, PLC, SCM) through RS485 serial communication module (shown as below). 

Analog Single Input function
Make the Remote Control Switch in “on” position. External Control Module is shown as below.

Terminals Definition
Terminal 1  Analog input in 4 – 20 mA, 0.5 -5V, 1 – 10V external control module to control the speed of pump.
Terminal 2  External control start/stop input. Open, the pump runs; Close, the pump stops.
Terminal 3  External control direction input. Open, the pump runs clockwise; Close, the pumps runs counter clockwise.
Terminal 4  COM of external control input.

Pulse Signal Input Function:
Terminal 1  COM of external control input
Terminal 2  External control start/stop input. Open, the pump runs; Close, the pump stops.
Terminal 3  External control direction input. Open, the pump runs clockwise; Close, the pumps runs counter clockwise.
Terminal 4  Pulse input in 1 – 10 kHz pulse external control module to control the speed of the pump.
Terminal 5  COM of pulse input

 

 

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

17/02/05