연구실험기자재

L0107  마이크로 주사기펌프
LONGER

L0107 마이크로 주사기펌프

[L0107 Series Micro Syringe Pumps]

TJ-1A/L0107-1A 주입식 1-채널 마이크로 주사기펌프
TS-1A/L0107-1A 주입식 4-채널 마이크로 주사기펌프
TJ-2A/L0107-2A 주입/흡입식 1-채널 마이크로 주사기펌프
TS-2A/L0107-2A 주입/흡입식 4-채널 마이크로 주사기펌프

  • L0107  마이크로 주사기펌프 1번 상세이미지 썸네일
  • L0107  마이크로 주사기펌프 2번 상세이미지 썸네일
  • L0107  마이크로 주사기펌프 3번 상세이미지 썸네일
  • L0107  마이크로 주사기펌프 4번 상세이미지 썸네일

 

  • TJ 주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 1-채널 마이크로 주사기 펌프로서 마이크로리터(uL) 단위의 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위 (7.9 um/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 수직 또는 수평으로 설치할 수 있는 구조는 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다.
  • TS주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 4-채널 마이크로 주사기 펌프로서, 밀리리터(mL) 표준 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위(7.9 um/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 구동부(driver)와 제어부(controller)가 별도로 되어 있으며, 컴팩트한 구조로 되어 있다. 수직 또는 수평으로 설치할 수 있는 구조이기 때문에 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다.
  • 대형 LCD 화면에서 회전스위치와 멤브레인키패드를 이용하여 파라메터의 설정을 간편하게 할 수 있다.

 

 

  • Working Mode : Infusion or infusion/withdrawal
  • Parameters Setting : The parameters of each channel can be different.
  • Running Control : Each drive unit can be controlled separately, or four drive units can be controlled to run simultaneously or run at different time
  • Channel Copy : All drive units can be run according to the parameters of one drive units of them
  • Delaying Startup : Delaying startup time of each channel can be controlled separately
  • Memory Function : Select resume operation or remain stopped when power turns after an interruption
  • Block Protection : When one drive unit stops accidently, the system will warm and stop
  • Working Mode: Infusion
  • External Control : Start/stop input control signal which is pulse mode to switch the states of start and stop
  • Communication : Realize computer control through RS485 communication interface
  • Main Functions for Each Channel
    • Syringe Selection : The syringe can be selected in the manufacture table which includes manufacturer, material and size
    • User-Defined Glass Syringe : Save 4 inner diameter of user-defined glass syringe barrel
    • Parameters Setting : Set dispensing volume, infusion time, pause time and copy number
    • Display Mode Selection : Different parameters (column, flow rate, linear speed)can be selected in the main display inter face
    • Fast Forward & Fast Reverse : Infusion at the max. speed
    • Calibration : Acquire accurate volume through calibration

 


-

 TJ-1A/L0107-1A 

TJ-1A.jpg

 TS-1A/L0107-1A

TS-1A.jpg

 

TS-2A/L0107-1A

TJ-2A.jpg

TS-2A/L0107-2A

TS-2A.jpg

Working Mode

 Infusion

Infusion/Withdrawal

Channel

1

1~4

1

1~4

Syringe

5 uL ~ 1.0 mL

Stroke

70 mm

Pusher Advance

0.165 um/step

Linear Speed

7.94 um/min ~ 79.4 mm/min

Linear Resolution

7.94 um/min

Linear Accuracy

≤±0.5% when ≥30% of pump stroke

Linear Force

≥2 kg(4.4 lbs)

Syringe Selection

Built-in syringe branched, size and inner diameters

Syringe Defined

Can store four user-defined syringe inner diamerters

Flowrate Calibration

Improve flowrate accuracy

Running Parameter

Dispensin volume can be each channel, all channel use the parameters of the specified channel

Start setting

Each drive unit can be started seperately, simultanously or according to each delay time

Display Setting

Display volume, flowrate or linear speed

Power-off Memory

Select keeping previous state or resetting parameters when power on

Forwarard/backward

Infuse or withrawal liquid at full speed

State Output

2 OC gate signal to indicate start/stop and direction

Control Input

3 TTL signal to control start/stop, fast forwarard and fast backward

Communication

RS-485

Drive unit dimension

180L x 46W x 78 mmH

Drive unit weight

0.6 kg

Controller dimension

170Lx108Wx65mmH

235Lx178Wx74mmH

170Lx108Wx65mmH

235Lx178Wx74mmH

Controller weight

0.5 kg

0.8 kg

0.5 kg

0.8 kg

Power

AC 90-260V/10W

AC 90-260V/40W

AC 90-260V/10W

AC 90-260V/40W



Syringe

 Diameter(mm)

Flowrate (nL/min~uL/min)

5 uL

0.35

0.764 - 7.64

10 uL

0.50

1.559 - 15.59

25 uL

0.80

3.991 - 39.91

50 uL

1.10

7.546 - 75.46

100 uL

1.60

15.96 - 159.6

250 uL

2.30

32.99 - 329.9

500 uL

3.25

65.87 - 658.7

1000 uL

4.61

132.5 - 1325

 

Model

Product code

Channel

Pusher Advance

Linear Force

TJ-1A/L0107-1A

050310A/050300A

1

0.165 um/step

≥2 kg (4.4 lbs)

TS-1A/L0107-1A

050315B/050300A

1~4

0.165 um/step

≥2 kg (4.4 lbs)

TJ-2A/L0107-2A

050311A/050301A

1

0.165 um/step

≥2 kg (4.4 lbs)

TS-2A/L0107-2A

050316B/050301A

1~4

0.165 um/step

≥2 kg (4.4 lbs)

TJ-4A/SL0104A-1A

050314A/050303A

1

3.048 um/step

≥1 kg (2.2 lbs)

TJ-4A/SL0107A-1A

050314A/050304A

1

3.048 um/step

≥1 kg (2.2 lbs)

 


TJ-4A for Micromanipulator

TJ-4A.jpg

TJ-4A-2.jpg

TJ-4A-3.jpg

 

 

 

견적문의견적문의
TOPTOP