튜브연동펌프
- 제품 외형의 재질이 Stainless Steel 또는 Die-cast aluminum으로 제공되어 다양한 분야에 적용
- 다양한 Fieldbus 통신, 디지털 및 아날로그 입력, 출력 제어를 지원
- 21CFR Part11 및 GMP 실험실 요구 사항의 요구 사항을 충족하는 전자 서명 및 감사 추적 기능이 있는 3단계 사용자 권한 관리
- 다양한 감지 기술 지원: 액체 누출 감지, 덮개 열림 정지, 예측 유지보수를 위한 유량 센서
- 높은 외함보호등급으로 해충 또는 진균 및 외부 분진 등의 침투에 대한 내부 기기를 보호하며, 물 또는 습기 및 오일 등의 침투로 인한 내부 기기를 보호할 수 있도록 설계 [International Protection, IP66]
- Available in stainless steel housing and cast aluminum housing for variety of applications
- IP66 for wet and dusty environment
- Supporting fieldbus communication control, digital signal control,analog signal control, and pump status output
- Three-level user authority management, with electronic signature and audit trail functions, meet 21CFR Part 11 and GMP lab requirements
- Integrating multiple sensors: fluid leakage sensor, open-head sensor and flow rate sensor, to realize predictive maintenance
|
Housingmaterial |
Cast aluminum |
|---|---|
|
Speed range |
0.1rpm-265rpm, CW/CCW |
|
Speedresolution |
0.1rpm |
|
Clock function |
Year/month/day/hour/minutecan be set, hours and minutes are displayed on the running screen |
|
Work mode |
Flow rate mode,dispensing mode, calibration mode |
|
Flow rate mode |
Pump runscontinuously at the set flow rate,and displays flow rate and pump speed onthe screen |
|
Flow ratesetting range |
1.1ml/min-17.0L/min（depending on pump head and tubing） |
|
Dispensingmode |
Pump repeats thedispensing at set volume, cycles and interval time, and displays singlevolume, dispensed volume, dispensed cycles/target cycles on screen |
|
Volume ofsingle dispense |
1.0mL-274.9L（dependingon pump head and tubing） |
|
Dispensingcycles |
1-9999 (0 forunlimited) |
|
Interval time |
5s-9999s |
|
Calibrationfunction |
Improve the flow rateand dispensing volume accuracy |
|
Control mode |
Keypad control,external signal control and communication control |
|
Communicationcontrol |
RS485 orTCP/IP(optional) interface, Modbus RTU, Industrial Ethernet(optional),Profibus DP (optional) |
|
Externalcontrol |
Speed control: 0-10V,4-20mA, Start/stop, direction control: 5V-24V logic level signal or relaysignal (dry contact) |
|
Status output |
Pump Speed: 0-10V,4-20mA, frequency signal (optional), Running/stop, direction, tubing leakalarm: relay signal (dry contact) |
|
Open headsensor |
Pump will stop whenpump head is open for enhanced user safety |
|
Status whenpower up |
Stop |
|
Keypad lockfunction |
Enable the keypadlock function to lock the keypad automatically after 20s standby, (start/stopkey will not be locked) |
|
Tubing leakdetection |
Detect the tubingleak and give alarm (optional) |
|
Flow ratemeasurement |
Measure the flow rateby connecting flow meter (optional) |
|
User accesscontrol |
Three levels of useraccesses (administrator, technician, operator) |
|
Electronicsignature and audit trail |
Meet the requirementof FDA 21CFR Part 11 |
|
Log record |
Record 90 days operation history, andcan be exported directly |
|
Support IQ/OQ |
Meet GMP requirement |
|
Certificate |
CE, UKCA , EN 61010-1:2010，EN IEC61010-2-201；EMC：EN IEC61000-6-2，EN IEC 61000-6-4 |
|
Deminsion(LxWxH) |
260x407x298mm |
|
Power supply |
AC100-240V 50/60Hz |
|
Operatingcondition |
Temperature: 5℃-40℃,relative humidity≤100% |
|
IP rating |
IP66 |
|
Weight (driveonly) |
≤17.6kg |
